THE SMOKIN' BARREL -- UTILITY HELP
by J.L. Kohli
----------------------------------
***********
*HYPERSNAP*
***********

1. Open the program (make sure you've unzipped/installed it!)
2. Open your Outlaws configuration tool (usually in Start/Programs/
   Lucas Arts/Outlaws/ --Configure Outlaws--
3. Make sure that you do not have the MGL driver selected,
   because Hypersnap doesn't work using this (at least for me)
4. After you've confirmed that, close the config program
5. In HYPERSNAP, click on the CAPTURE menu
6. choose CAPTURE SETTINGS
7. click on the QUICK SAVE tab
8. Check the following boxes:
	-Automatically save each capture to a file
	-Increment file name, starting at...
9. in the area that says "Auto Save To:"
   and the box where it says "File Name:", click on the CHANGE button
10. select a folder where you'd like to save your screenshots
    (personally, I made a folder named SS in my Outlaws folder)
11. click APPLY, then OK
12. click on the OPTIONS menu, and choose SCREEN CAPTURE HOT KEYS
13. at the bottom, make sure HANDLE PRINT SCREEN KEY is checked,
    then click CLOSE
14. MINIMIZE Hypersnap and start Outlaws. After your chosen level/mission
    has loaded, press the PRINT SCREEN key on your keyboard,
    located right next to your F12 key (most usually)
15. this should have taken a screenshot of what you saw when you
    pressed the PRINT SCREEN key. to confirm that, exit Outlaws
    and look in the folder you designated as your screenshot folder.
    are there any new image files? if so, open one and make sure it
    is an actual screen shot, not a big blank white or black space
    (like I got with the MGL driver)
16. that's all there is to it!

NOTE: I am not liable for any problems/mishaps you have using Hypersnap.
Contact them if you have any further questions. This file is only a guide
to get newbies started.

***********************************
*http://thesmokinbarrel.tripod.com*
***********************************